Remove all packing material and tape. Install on a level floor or well-supported counter. Avoid any direct sunlight, heat source, or moisture. This product is designed to be freestanding and must be installed at least 2” from the wall, 3/4” to 1“ above the floor or carpet, 1″ on sides, and 2″ on top in order to let the air circulate freely around the unit.
A minimum 15 AMP electrical supply is required (20 AMP electrical supply preferred). A time-delay fuse or circuit breaker and separate circuit is recommended.
Electrical Requirements: 115 V | 60 Hz Running Amperage: 0.8 A
Listed by Underwriters Laboratories
INSTALLATION REQUIREMENTS
Remove all packing material and tape. Install on a level floor or well-supported counter. Avoid any direct sunlight, heat source, or moisture. This product is designed to be freestanding and must be installed at least 2” from the wall, and the cabinet bottom is at least 3/4” to 1“ above the loor or carpet, 1” on sides, 2” on top in order to let the air circulate freely around the unit.